Clear-Com TEMPEST 2400 Specifikace stáhnout pdf (Strana 51)

Clear-Com Communication Systems Page 51 of 100

Tempest 2400 Wireless Intercom System

Always set each base station to a different Network Numbe

and Lockout Key. See the Set Network

Number and Lockout Key section on page 31 of this manual for more setup information.

Special RF Considerations with Multiple Base Stations

Whenever multiple Tempest base stations are operated together in close proximity, special consideration

must be taken to ensure proper system operation and maximize operational range.

See the Antenna Location section on page 24 of this manual for more information on antenna placement.

See the Antenna Configuration section on page 25 of this manual for details about recommended cable

type and other important information about connecting your antennas to your Tempest base station.

See the Accu-Sync section on page 49 for more information on using Accu-Sync.

Up to 10 base stations may be used in simultaneous operation in close proximity to each other with

proper antenna placement under ideal conditions. Closely spaced antennas will cause adverse system

performance and will reduce operational range.

When two or more Tempest base stations are to be operated in the same location, connecting the

base stations via the Accu-Sync connector on the back of the base station can significantly

increase system performance and operational range.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Žádné komentáře

Clear-Com TEMPEST 2400 Specifikace Strana 51