Clear-Com EclipseHX Uživatelská příručka stáhnout pdf (Strana 103)

5.24.1 Adding an E-FIB card

To add an E-FIB card:

1) In Hardware > Cards and Ports, navigate to an available slot number (marked

Empty). Do either of the following:

• Double click the slot.

• Right click the slot and select Set Card Type.

2) A drop-down menu is displayed, listing the available card types. Select either E-

FIB (Fiber) or E-FIB (Redundant).

Note: Only one E-FIB (Fiber) and one E-FIB (Redundant) card can be added. Clear-Com

recommends that E-FIB cards are fitted to slots 6 and/or 7 of Eclipse HX-Median matrices,

slots 14 and/or 15 of Eclipse HX-Omega matrices and slot 4 of Eclipse HX-Delta matrices.

Figure 5-10 E-FIB Fiber Card Selection

5.24.2 Removing an E-FIB card

To remove an E-FIB card:

1) In Hardware > Cards and Ports, navigate to the slot number of the E-FIB card

you want to delete. Do either of the following:

• Double click the slot.

• Right click the slot and select Set Card Type.

2) A drop-down menu is displayed, listing the available card types. Select Empty.

A warning dialog is displayed. To confirm the deletion, click Yes.

5.24.3 Configuring an E-FIB card

The E-FIB card provides a single fiber port that can be configured to have Talk and Listen

labels and a description.

103

Eclipse EHX Software User Guide

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 289 290

Žádné komentáře

Clear-Com EclipseHX Uživatelská příručka Strana 103