Clear-com VOICE2 Uživatelský manuál stáhnout pdf (Strana 70)

Vitec Group Communications

VoICE IP Interface User Manual

3-30

RECOVERY CD

The CD supplied also contains an image for a recovery CD. This CD

will allow systems that have become unusable, for example because

the IP address is unknown, to be completely reset.

To use the recovery CD carry out the following steps:

1. First burn the recovery disk ISO image onto a CD.

2. Attach an external USB CDROM drive to the VoICE unit’s USB port.

3. Restart the VoICE unit so it boots from the CDROM instead of the

internal system.

4. The CDROM system with return the unit to its factory shipment

condition. During this phase the LEDs on the front will flash

sequentially to indicate that the recovery is in progress. When

recovery is complete all the front LEDs will flash together.

5. When the VoICE unit restore is complete remove the external

CDROM drive from the VoICE unit.

6. Restart the VoICE unit.

7. Configure the VoICE unit as described in this manual.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 105 106

Žádné komentáře

Clear-com VOICE2 Uživatelský manuál Strana 70